Canon EOS 80D (W) Page 217 Instruction Manual Download

Page: 217 / 526

217

Multiple Exposures

Before you finish shooting the set
number of exposures, you can press the
<

> button to check the current

exposure level, overlap alignment, and
overall effect of the merged multiple-
exposure image.
If you press the <

> button, the

operations possible during multiple-
exposure shooting will be displayed.

Checking and Deleting Multiple Exposures During Shooting

Operation

Description

Undo last image

Deletes the last image you shot (shoot another image).
The number of remaining exposures will increase by 1.

Save and exit

The images shot so far will be merged and saved as a
multiple-exposure image.

Exit without saving

Multiple-exposure shooting will exit without saving the
images shot.

Return to previous

screen

The screen before you pressed the <

> button will

reappear.

During multiple-exposure shooting, you can only play back multiple-exposure
images.

Summary of Contents for EOS 80D (W)















































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands

Canon EOS 80D (W), Instruction Manual

Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands