Canon EOS 80D (W), Instruction Manual

Page: 197 / 526

197
a
: Manual Exposure
If the ISO speed is set to A (AUTO) for manual exposure shooting, you
can set exposure compensation (p.200) as follows:
• [
z
2: Expo.comp./AEB ]
• Under [
8
C.Fn III-4: Custom Controls ] with [
s
: Expo comp
(hold btn, turn
S
) ] (p.438).
• Quick Control (p.56)
Exposure Compensation with ISO Auto

If ISO Auto is set, the ISO speed setting will change to suit the shutter
speed and aperture in order to obtain a standard exposure. Therefore,
you may not obtain the desired exposure effect. In such a case, set the
exposure compensation.

If flash is used when ISO Auto is set, exposure compensation will not be
applied even if an exposure compensation amount is set.

Under [
z
2: Auto Lighting Optimizer ], if the checkmark [ X ] for
[ Disabled in M or B modes ] is removed, Auto Lighting Optimizer can be
set even in the <
a
> mode (p.169).

When ISO Auto is set, you can press the <
A
> button to lock the ISO
speed.

If you press the <
A
> button and recompose the shot, you can see the
exposure level difference on the exposure level indicator compared with
when the <
A
> button was pressed.

If exposure compensation (p.200) was applied in <
d
>, <
s
>, or <
f
>
mode, and then the shooting mode is switched to <
a
> with ISO Auto
set, the exposure compensation amount already set will still be
maintained.

With ISO Auto set and [
8
C.Fn I-1: Exposure level increments ] set to
[ 1: 1/2-stop ], 1/2-stop exposure compensation will be applied with the
ISO speed (1/3 stop) and shutter speed. However, the shutter speed
displayed will not change.