Canon EOS 7D Mark II (G), Instruction Manual

Page: 424 / 550

424
With a PictBridge printer, you can easily
print images with DPOF.
1
Prepare to print.
See page 412.
Follow the “Connecting the Camera to a Printer” procedure up to
step 5.
2
Under the [
3
1] tab, select [Print order].
3
Select [Print].
[ Print ] will be displayed only if the camera is connected to a
printer and printing is possible.
4
Set the [Paper settings]
(p.414)
.
Set the printing effects (p.416) if necessary.
5
Select [OK].
W Direct Printing of Print-Ordered Images
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file number.
If [ Bordered ] is set, certain printers may imprint the date on the border.
Depending on the printer, the date may appear faint if it is imprinted on a
bright background or on the border.
Under [ Adjust levels ], [ Manual ] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [
Resume ]. Note that printing will not resume if any of the
following are the case:
• You changed the print order or deleted any of the print ordered images
before resuming the printing.
• When index is set, you changed the paper setting before resuming the
printing.
• The card’s remaining capacity was low when you paused the printing.
If a problem occurs during printing, see page 420.