Canon EOS 7D Mark II (G), Instruction Manual

Page: 380 / 550

380
You can edit out the first and last scenes of a movie in approx. 1-sec.
increments.
1
On the movie playback screen,
select [
X
].
X The movie editing panel will be
displayed at the bottom of the screen.
2
Specify the part to be edited out.
Select either [
U
] (Cut beginning) or
[
V
] (Cut end), then press <
0
>.
Tilt <
9
> to the left or right to see the
previous or next frames. Holding
down the key will fast forward or fast
rewind the frames. Turn the <
5
> dial
for frame-by-frame playback.
After deciding which part to edit out,
press <
0
>. The portion highlighted
in gray on the top of the screen is
what will remain.
3
Check the edited movie.
Select [
7
] and press <
0
> to play
back the edited movie.
To change the editing, go back to step
2.
To cancel the editing, press the
<
M
> button, then select [ OK ] on
the confirmation screen.
X
Editing a Movie’s First and Last Scenes