Canon EOS 7D Mark II (G) Instruction Manual Download Page 317

Page: 317 / 550

317

Shooting Movies

ISO speed in the <

> mode

In the <

> mode, the ISO speed will be set automatically within

ISO 100 - ISO 16000.

ISO Speed in the <

>, <

>, and <

> Mode

The ISO speed will be set automatically within ISO 100 - ISO 16000.

Under [

2: ISO speed settings

] (p.157), if you set the [

ISO speed

range

]’s [

Maximum

] setting to [

H1 (25600)

] in the <

>, <

>, or

> mode, the automatic ISO range will be expanded to H1

(equivalent to ISO 25600). Even if you set the [

Maximum

] and

[

Minimum

] to a narrower range than the default ISO range (ISO 100

- ISO 16000), it will not take effect.

If [

3: Highlight tone priority

] is set to [

Enable

] (p.180), the

automatic ISO range will be ISO 200 - ISO 16000.

Under [

2: ISO speed settings

], [

Auto ISO range

] and [

Min.

shutter spd.

] cannot be set (p.158-159) for movie shooting. Also,

[

ISO speed range

] cannot be set in the <

> mode.

For [

ISO speed range

], if [

Maximum

] is set to [

H2 (51200)

] and you switch

from still photo shooting to movie shooting, the automatic ISO range’s
maximum for movie shooting will be H1 (equivalent to ISO 25600, except in
<

> and <

> modes). It cannot be expanded to ISO 51200.

Summary of Contents for EOS 7D Mark II (G)







































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 7D Mark II (G)

Reviews:

Related manuals for EOS 7D Mark II (G)

Brands by name

Popular brands

Canon EOS 7D Mark II (G), Instruction Manual

Search results

Summary of Contents for EOS 7D Mark II (G)

Reviews:

Related manuals for EOS 7D Mark II (G)

Brands by name

Popular brands