Canon EOS 7D Mark II (G), Instruction Manual

Page: 271 / 550

271
3
Setting the Flash
N
For details on the external Speedlite’s Custom Functions, refer to the
Speedlite’s (sold separately) instruction manual.
1
Select [External flash C.Fn
setting].
2
Set the desired functions.
Select the number, then press <
0
>.
Select the setting, then press <
0
>.
1
Select [Clear settings].
2
Select the settings to be cleared.
Select [ Clear built-in flash set. ],
[ Clear external flash set. ], or [ Clear
ext. flash C.Fn set. ], then press
<
0
>.
On the confirmation dialog, select
[
OK ]. Then the flash settings or
Custom Function settings will all be
cleared.
External Speedlite Custom Function Settings
Clear Settings
With an EX-series Speedlite, if the [ Flash metering mode ] Custom
Function is set to [ TTL flash metering ] (autoflash), the Speedlite will always
fire at full output.
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled with the
camera’s [
Flash control ] screen. Set it with the Speedlite.