Canon EOS 77D, Instruction Manual

Page: 38 / 502

38
1
Remove the protective cover.

Detach the protective cover provided
with the battery.
2
Attach the battery.

As shown in the illustration, attach the
battery securely to the charger.

To detach the battery, follow the
above procedure in reverse.
3
Recharge the battery.
For LC-E17

As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E17E

Connect the power cord to the
charger and insert the plug into a
power outlet.
 Recharging starts automatically and
the charge lamp lights up in orange.
 When the battery is fully recharged,
the full-charge lamp will light up in
green.

It takes approx. 2 hours to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F).
The time
required to recharge the battery will vary greatly depending on the
ambient temperature and the battery’s remaining capacity.

For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take longer (up to approx. 4 hr.).
Charging the Battery
LC-E17
LC-E17E
Full-charge lamp
Charge lamp