Canon EOS 77D Instruction Manual Download Page 262

Page: 262 / 502

262

Focusing with AF

The selected Zone AF frame is used to focus. The AF area is larger
than with [

Live 1-point AF

Display the Live View image.



Press the <

> button.



The Live View image will appear on
the LCD monitor.



The Zone AF frame will be displayed.

Select the AF point.



Press the <

> <

> or <

> <

keys to select a zone. To return to the
center zone, press <

> or the <

button.



You can also touch the LCD monitor
screen to move the Zone AF frame.

Focus on the subject.



Aim the Zone AF frame over the
subject and press the shutter button
halfway.



When focus is achieved, the AF point
will turn green and the beeper will
sound.



If focus is not achieved, the Zone AF
frame will turn orange.

Smooth Zone:

Zone AF frame

Summary of Contents for EOS 77D























































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 77D

Reviews:

Related manuals for EOS 77D

Brands by name

Popular brands

Canon EOS 77D, Instruction Manual

Search results

Summary of Contents for EOS 77D

Reviews:

Related manuals for EOS 77D

Brands by name

Popular brands