Canon EOS 77D Instruction Manual Download Page 257

Page: 257 / 502

257

Changing the Autofocus Operation

Suited for still subjects. When you press the shutter button
halfway, the camera will focus only once.



When focus is achieved, the AF point will turn green and the beeper
will sound.



The focus remains locked while you hold down the shutter button
halfway, allowing you to recompose the image before taking the
picture.



When the drive mode is set to <

> for high-speed continuous

shooting, the maximum continuous shooting speed is approx. 6.0
shots/sec.



When the drive mode is set to <

> for low-speed continuous

shooting, the maximum continuous shooting speed is approx. 3.5
shots/sec.



For flash photography, the continuous shooting speed will become
slower. Regardless of the <

> and <

> settings, the continuous

shooting speed will be the same (max. approx. 2.0 shots/sec.).

One-Shot AF for Still Subjects

If [

3: Beep

] is set to [

Disable

], the beeper will not sound when focus is

achieved.

Summary of Contents for EOS 77D























































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 77D

Reviews:

Canon EOS 77D, Instruction Manual, Page: 257 / 502

Search results

Summary of Contents for EOS 77D

Reviews: