Canon EOS 760DW Instruction Manual Download

Page: 92 / 430

When shooting food, use <

> (Food). The photo will look bright and

vivid.

Change the color tone.

You can change [

Color tone

]. Food photos with a reddish tinge

usually make the food look more vivid. To increase the food’s
reddish tinge, set it toward [

Warm tone

]. Set it toward [

Cool tone

] if

it looks too red.

Shoot the subject in close-up.

If you have a zoom lens, use the telephoto end to shoot the food in
close-up.

Avoid using flash.

If you use flash, the light may reflect off the dish or food and results
in unnatural shadows. By default, <

> (Flash off) is set. Try to

prevent camera shake when shooting in low-light conditions.

Shooting Food

Shooting Tips

Since this mode sets the color tone to make food look vivid, human
subjects may be shot in an unsuitable skin tone.

If you use flash, the [

Color tone

] setting will switch to the standard

setting.

Summary of Contents for EOS 760DW















































































































































































































































































































































































































































Search results

Summary of Contents for EOS 760DW

Reviews:

Related manuals for EOS 760DW

Brands by name

Popular brands

Canon EOS 760DW, Instruction Manual

Search results

Summary of Contents for EOS 760DW

Reviews:

Related manuals for EOS 760DW

Brands by name

Popular brands