Canon EOS 750D W, Instruction Manual

Page: 30 / 168

30
Connecting with the NFC Function
3
Operate the Camera using
Camera Connect.

Perform further operations using
Camera Connect. For the operation
procedure, see page 35.
The settings for communicating with a smartphone are now complete.
NFC Function Cautions

When touching the smartphone to the camera, be careful not to drop the
camera or smartphone.

Do not touch the smartphone to the camera with too much force. Doing
so can scratch the camera or smartphone.

Just holding the smartphone close to the mark may not establish a
connection. Be sure to touch the mark with the smartphone so that they
come into contact with each other.

Recognition may be difficult depending on the smartphone. Touch slowly
while changing the position or angle.

Another application on the smartphone may start depending on how you
touch. Check the position of the
p
mark, then touch again.

A connection cannot be established via the NFC function while shooting
with the camera, when the power switch is set to <
k
>, when there is no
card, or when the LCD monitor is closed with the screen facing inward.

When touching the smartphone to the camera, do not leave anything
between the camera and smartphone. In addition, when a case is
attached to the camera or smartphone, communication may not be
possible via NFC function.

When Battery Grip BG-E18 (sold separately) is attached, a connection
cannot be established via the NFC function.

The camera cannot be connected to two or more smartphones at the
same time.

By default, the connection settings via the NFC function are saved as the
fourth setting (a setting dedicated to NFC connection) under the name
[
SET4(NFC) ]. When you connect the camera to another smartphone via
NFC, [ SET4(NFC) ] will be overwritten.

A connection can be established even when the camera’s power is in the
auto power off state. However, if a connection cannot be established,
cancel auto power off, then establish a connection.