Canon EOS 750D W Page 149 Instruction Manual Download

Page: 149 / 168

149

Responding to Error Messages



Does the card in the camera to receive data have sufficient
space?



Check the card in the camera to receive data. Replace the card or
make sufficient space available, then try sending the data again.



Is the card in the camera to receive data locked?



Check the card in the camera to receive data. Release the lock,
then try sending the data again.



Check if the folder number of the camera to receive data is
999 and the file number 9999.



Folder or file names cannot be created automatically. Replace the
card in the camera to receive data, then try sending the data again.



Is the card working properly?



Replace the card in the camera to receive data, then try sending
the data again.



Is the camera to receive data compatible with playback of
MP4-format movies?



When the camera to receive data is not compatible with playback
of MP4-format movies, movies shot with this camera cannot be
sent to the camera.



Is the camera to receive data ready to receive data?



Check the battery of the camera to receive data and connection
status, then try sending the data again.



Does the card in the camera to receive data have sufficient
space?



Check the card in the camera to receive data. Replace the card or
make sufficient space available, then try sending the data again.

102: Could not send files

103: Could not receive files

104: Could not receive files. Card full

Summary of Contents for EOS 750D W









































































































































































Search results

Summary of Contents for EOS 750D W

Reviews:

Related manuals for EOS 750D W

Brands by name

Popular brands

Canon EOS 750D W, Instruction Manual

Search results

Summary of Contents for EOS 750D W

Reviews:

Related manuals for EOS 750D W

Brands by name

Popular brands