Canon EOS 750D W, Instruction Manual

Page: 141 / 168

141
Responding to Error Messages

In the case of [
q
], is Camera Connect running?

Establish a connection using Camera Connect (p.33, 84).

In the case of [
l
], is the power of the printer on?

Turn on the printer.

Are the camera and the access point set to use the same
encryption key for authentication?

This error occurs if the encryption keys do not match when the
authentication method for encryption is set to [
Open system ].
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is entered on the camera (p.80, 119).

Is the power of the target device and access point on?
 Turn on the target device and access point, then wait a while. If a
connection still cannot be established, perform the procedures to
establish the connection again.
11: Connection target not found
12: Connection target not found