k
Shooting Movies
262
AEB cannot be used.
Even if a flash is used, it will not fire.
Continuous still photo shooting is possible during movie shooting.
However, the captured images will not be displayed on the screen.
Depending on the still photo’s image-recording quality, number of shots
during continuous shooting, card performance, etc., movie shooting may
stop automatically.
When you press the <
p
> button to autofocus during movie
shooting, the following phenomena may occur.
• Focus may become far off momentarily.
• The brightness of the recorded movie may be different from that of the
actual scene.
• The recorded movie may be momentarily still.
• The movie may record the lens operation noise.
• You cannot shoot still photos when focus is not achieved, such as
when the subject is moving.
Autofocus will not be performed during movie shooting even if the shutter
button is pressed halfway.
If you want to shoot still photos continuously during movie shooting,
using a high-speed card is recommended. Setting a smaller image-
recording quality for still photos and shooting fewer continuous still
photos are also recommended.
You can shoot still photos in all drive modes.
The self-timer can be set before you start shooting a movie. During
movie shooting, the camera will switch to single-image shooting.
