Canon EOS 6D Instruction Manual Download Page 242

Page: 242 / 406

242

Search for images quickly with the index display showing four or nine
images on one screen.

Press the <

> button.



Press the <

> button during image

playback.

[

] will be displayed on the lower

right of the screen.

Switch to the index display.



Turn the <

> dial counterclockwise.

The 4-image index display will appear. The
selected image is highlighted in a orange frame.



If you turn the <

> dial further to the left,

the 9-image index display will appear. If you
turn the <

> dial to the right, the index

display will change as follows: 9-image, 4-
image, and single-image display.

Select an image or movie.



Turn the <

> dial to move the orange

frame and select the image. You can also
select it with the <

> or <

> key.



Press the <

> button to turn off the

[

] icon, then turn the <

> dial

to go to the next or preceding screen.



Press <

> in the index display, and the selected

image will be displayed as a single image.

Searching for Images Quickly

Display Multiple Images on One Screen (Index Display)

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Brands by name

Popular brands