Canon EOS 6D Page 215 Instruction Manual Download

Page: 215 / 406

215

In Creative Zone modes, you can set the following:

AF method

drive

mode

image-recording quality

movie-recording size

, sound-

recording level (with [Sound recording: Manual] set), white balance,
Picture Style, Auto Lighting Optimizer, and

video snapshot

In Basic Zone modes, only the functions in bold can be set.

Press the <

> button.

The settable functions will be displayed.

Select a function and set it.



Press the <

> key to select a function.

The selected function and Feature guide (p.63) will appear.



Set it by pressing the <

> key.



To set the RAW image-recording quality or Picture Style
parameters, press the <

> button.

Exit the setting.



Press <

> to finalize the setting and return to movie shooting.

While the movie image is displayed on the LCD monitor, if you press the
<

> or <

> button, the setting screen will appear on the LCD

monitor and you can turn the <

> or <

> dial to set the respective

shooting function.
When Quick mode is set, you can press the <

> button to select the

AF point. The procedure is the same as with viewfinder shooting.
During manual-exposure shooting (p.208), you can press the <

button to set the ISO speed.

Shooting Function Settings

Quick Control

Settings

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands