Canon EOS 6D Page 142 Instruction Manual Download

Page: 142 / 406

142

The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.

* <

> stands for Program.

* AE stands for Auto Exposure.

Set the Mode Dial to <

Focus the subject.



Look through the viewfinder and aim
the selected AF point over the
subject. Then press the shutter button
halfway.

The AF point which achieves focus
flashes in red, and the focus
confirmation light <

> in the

viewfinder’s bottom right lights up
(when in One-Shot AF mode).

The shutter speed and aperture will
be set automatically and displayed in
the viewfinder and on the LCD panel.

Check the display.



A standard exposure will be obtained
as long as the shutter speed and
aperture display do not blink.

Take the picture.



Compose the shot and press the
shutter button completely.

: Program AE

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands