3
White Balance Correction
N
124
With just one shot, three images having a different color tone can be recorded
simultaneously. Based on the color temperature of the current white balance
setting, the image will be bracketed with a blue/amber bias or magenta/green
bias. This is called white balance bracketing (WB-BKT). White balance
bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing
amount.
In step 2 for “White Balance
Correction”, when you turn the <
5
>
dial, the “ ” mark on the screen will
change to “ ” (3 points). Turning
the dial to the right sets the B/A
bracketing, and turning it to the left
sets the M/G bracketing.
X
On the right, “
Bracket
” indicates the
bracketing direction and correction amount.
Pressing the <
L
> button will cancel
all the [
WB Shift/Bkt.
] settings.
Press <
0
> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
White Balance Auto Bracketing
B/A bias ±3 levels
During WB bracketing, the maximum burst for continuous shooting will be lower and
the number of possible shots will also decrease to one-third the normal number.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, it takes longer to record the shot to the card.
You can change the number of shots for white balance bracketing (p.305).
“
BKT
” stands for bracketing.
