Canon EOS 6D Page 30 Instruction Manual Download

Page: 30 / 406

Load a fully charged Battery Pack LP-E6 (or LP-E6N) into the camera.

Open the cover.



Slide the lever as shown by the
arrows and open the cover.

Insert the battery.



Insert the end with the battery
contacts.



Insert the battery until it locks in
place.

Close the cover.



Press the cover until it snaps shut.

Open the cover and remove the
battery.



Press the battery lock lever as shown
by the arrow and remove the battery.



To prevent short circuiting of the
battery contacts, be sure to attach the
provided protective cover (p.28) to
the battery.

Installing and Removing the Battery

Installing the Battery

Removing the Battery

Only Battery Pack LP-E6/LP-E6N can be used.

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands