Canon EOS 6D Page 28 Instruction Manual Download

Page: 28 / 406

Remove the protective cover.



Detach the protective cover provided
with the battery.

Attach the battery.



As shown in the illustration, attach the
battery securely to the charger.



To detach the battery, follow the
above procedure in reverse.

Recharge the battery.
For LC-E6



As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.

For LC-E6E



Connect the power cord to the
charger and insert the plug into a
power outlet.

Recharging starts automatically and
the charge lamp blinks in orange.



It takes approx. 2.5 hours to fully recharge a completely exhausted battery at room
temperature (23

C / 73

F). The time required to recharge the battery will vary greatly

depending on the ambient temperature and the battery’s remaining capacity.



For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take longer (up to approx. 4 hours).

Charging the Battery

LC-E6

LC-E6E

Charge Level

Charge Lamp

Color

Indicator

0 - 49%

Orange

Blinks once per second

50 - 74%

Blinks twice per second

75% or higher

Blinks three times per second

Fully charged

Green

Lights up

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands