Canon EOS 6D Instruction Manual Download Page 254

Page: 254 / 406

Playing Movies

254

Movie Playback Panel

* When background music is set, the movie’s sound will not be played.

Operation

Playback Description

Play

Pressing <

> toggles between play and stop.

Slow motion

Adjust the slow motion speed by pressing the <

> key.

The slow-motion speed is indicated at the upper right of the
screen.

First frame

Displays the movie’s first frame.

Previous

frame

Each time you press <

>, the previous frame is displayed.

If you hold down <

>, it will rewind the movie.

Next frame

Each time you press <

>, the movie will play frame-by-

frame. If you hold down <

>, it will fast forward the movie.

Last frame

Displays the movie’s last frame.

Background

music*

Play back a movie with the selected background music
(p.260).

Edit

Displays the editing screen (p.255).
Playback position

mm’ ss”

Playback time (minutes:seconds with [

Movie play count:

Rec time

] set)

hh:mm:ss:ff

Time code (hours:minutes:seconds:frames with [

Movie play

count: Time code

] set)

Volume

You can adjust the built-in speaker’s (p.253) volume by
turning the <

> dial.

Pressing the <

> button returns to the single-image

display.



With a fully-charged Battery Pack LP-E6, the continuous playback time
at room temperature (23°C/73°F) will be as follows: approx. 4 hr. 15 min.



If you connect the camera to a TV set to play a movie (p.261, 264),
adjust the sound volume with the TV set. (Turning the <

> dial will not

change the sound volume.)



If you took a still photo while you shot the movie, the still photo will be
displayed for approx. 1 sec. during the movie playback.

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Canon EOS 6D, Instruction Manual, Page: 254 / 406

Search results

Summary of Contents for EOS 6D

Reviews: