Canon EOS 6D Page 230 Instruction Manual Download

Page: 230 / 406

Shooting Video Snapshots

230

You can play a completed album in the same way as a normal movie
(p.253).

Play back the movie.



Press the <

> button to display

images.

Select the album.



Turn the <

> dial to select an album.



On the single-image display, the
[

] icon displayed on the upper

left indicates that the image is a video
snapshot.

Play back the album.



Press <



On the movie playback panel
displayed, select [

] (Play), then

press <

Playing an Album

Cautions for Shooting Video Snapshots



You can add to an album only video snapshots with the same duration
(approx. 2 sec., 4 sec., or 8 sec. each).



Note that if you do any of the following while shooting video snapshots, a
new album will be created for subsequent video snapshots.
• Changing the [

Movie rec. size

] (p.216).

• Changing the [

Sound rec.

] setting from [

Auto/Manual

] to [

Disable

] or

from [

Disable

] to [

Auto/Manual

] (p.218).

• Updating the firmware.



You cannot take still photos while shooting a video snapshot.



The shooting duration of a video snapshot is only approximate.
Depending on the frame rate, the shooting duration displayed during
playback may not be exact.

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands