Canon EOS 6D Page 208 Instruction Manual Download

Page: 208 / 406

Shooting Movies

208

You can manually set the shutter speed, aperture, and ISO speed for
movie shooting. Using manual exposure to shoot movies is for
advanced users.

Set the Mode Dial to <

Set the Live View shooting/Movie
shooting switch to <

Set the ISO speed.



Press the <

> button.

The ISO speed setting screen will
appear on the LCD monitor.



Turn the <

> dial to set the ISO speed.



For details on the ISO speed, see the
next page.

Set the shutter speed and aperture.



Press the shutter button halfway and
check the exposure level indicator.



To set the shutter speed, turn the
<

> dial. The settable shutter speeds

depend on the frame rate <

•

: 1/4000 sec. - 1/30 sec.

•

: 1/4000 sec. - 1/60 sec.



To set the aperture, turn the <

> dial.



If it cannot be set, set the <

switch to the left, then turn the <

or <

> dial.

Focus and shoot the movie.



The procedure is the same as steps 3
and 4 for “Autoexposure Shooting”
(p.204).

Manual Exposure Shooting

Shutter speed

Aperture

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands