Canon EOS 6D Page 204 Instruction Manual Download

Page: 204 / 406

204

When the shooting mode is set to other than <

>, autoexposure

control will take effect to suit the scene’s current brightness.

Set the shooting mode.



Set the Mode Dial to any shooting
mode except <

Set the Live View shooting/Movie
shooting switch to <

The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Focus the subject.



Before shooting a movie, focus with
AF or manual focus (p.192-200).



When you press the shutter button
halfway, the camera will focus with
the current AF method.

Shoot the movie.



Press the <

> button to start

shooting a movie.

While the movie is being shot, the
“

” mark will be displayed on the

upper right of the screen.



To stop shooting the movie, press the
<

> button again.

Shooting Movies

Autoexposure Shooting

Recording movie

Microphone

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands