Canon EOS 6D Mark II, Instruction Manual

Page: 343 / 610

343
3
Setting the Movie Recording Quality
When shooting movies, use a large-capacity card with a writing/reading
speed (required card performance) shown in the table below or higher
than the standard specification. Test the card by taking a few movies in
the desired quality (p.341) and make sure the card can properly record
the movie.
* The required card performance for time-lapse movies applies to reading speed.
Cards that Can Record Movies
Movie Recording Quality
SD Card
Normal movie
L
87
X
C
SD Speed Class 10 or higher
654
HDR movies
SD Speed Class 6 or higher
65 V
SD Speed Class 4 or higher
w
87 X
SD Speed Class 6 or higher
65 V
SD Speed Class 4 or higher
Time-lapse movie (p.349)
H
65
J
D
UHS-I 90 MB/sec. or faster
L W UHS-I Speed Class 3 or higher
If you use a slow-writing card when shooting movies, the movie may not
be recorded properly. Also, if you play back a movie on a card with a
slow reading speed, the movie may not be played back properly.
When movies cannot be recorded normally, format the card and try
again. If formatting the card does not resolve the problem, refer to the
card manufacturer’s Web site, etc.
The camera is not compatible with UHS-II, the ultra high speed transfer
standard of SDHC/SDXC cards. (Compatible with UHS-I.) With a UHS-II-
compatible card, high-speed transfer via UHS-I may not be possible
depending on the card specification.