Canon EOS 6D Mark II, Instruction Manual

Page: 165 / 610

165
3
Setting the Image-Recording Quality
The number of possible shots is based on Canon’s testing standards and an
8 GB card.
The maximum burst during continuous shooting is based on Canon’s standard
testing SD card (Standard: 8 GB, High-speed: UHS-I 16 GB) and testing
standards (<
o
> High-speed continuous shooting, 3:2 aspect ratio, ISO 100,
Standard Picture Style).
The file size, number of possible shots, and maximum burst will vary
depending on the subject, card brand, aspect ratio, ISO speed, Picture
Style, Custom Functions, and other settings.
Even if you use a high-speed SD card, maximum burst indicator will not
change. The maximum burst in the table on the preceding page will apply
instead.
If you select both RAW and JPEG, each time you shoot, the image will be
recorded simultaneously to the card in both RAW and JPEG at the
image-recording qualities that were set. The two images will be recorded
with the same file numbers (file extension: .JPG for JPEG and .CR2 for
RAW).
The image-recording quality icons indicate as follows:
1
(RAW),
41
(Medium RAW),
61
(Small RAW), JPEG (JPEG),
7
(Fine),
8
(Normal),
3
(Large),
4
(Medium),
6
(Small).