Canon EOS 6D Mark II Function Instruction Manual Download Page 65

Page: 65 / 170

Sending Images to the Other Camera

Specify the range of images to send all the images in the range at once.

Press <

Select [Send range].

Specify the range of images.



Select the first image (start point),
then press <



Select the last image (end point),
then press <



Images will be selected and [

] will

appear.



To cancel the selection, repeat this
step.



You can press the <

> button and turn

the <

> dial to change the number of

images shown in the index display.

Confirm the range.



Press the <

> button.



To return to the previous screen,
press the <

> button.

Sending a Specified Range of Images

Summary of Contents for EOS 6D Mark II











































































































































































Search results

Summary of Contents for EOS 6D Mark II

Reviews:

Related manuals for EOS 6D Mark II

Brands by name

Popular brands

Canon EOS 6D Mark II, Function Instruction Manual

Search results

Summary of Contents for EOS 6D Mark II

Reviews:

Related manuals for EOS 6D Mark II

Brands by name

Popular brands