Canon EOS 5DS, Instruction Manual

Page: 395 / 534

395
d
Transferring Images to a Computer
Sel.Image
1
Select [Image transfer].
Under the [
3
2 ] tab, select [ Image
transfer ], then press <
0
>.
2
Select [Image sel./transfer].
3
Select [Sel.Image].
4
Select the images to be
transferred.
Turn the <
5
> dial to select the
image to be transferred, then press
<
0
>.
Turn the <
5
> dial to display the [
X
] on
the screen’s upper left, then press <
0
>.
If you press the <
u
> button and turn
the <
6
> dial counterclockwise, you
can select an image from a three-image
display. To return to the single-image
display, turn the <
6
> dial clockwise.
To select other images to be
transferred, repeat step 4.
3
Selecting the Images to be Transferred
When [ Sel.Image ] is selected, you can check the image’s transfer status
on the upper left of the screen: No mark: Not selected. X : Selected for
transfer. l : Transfer failed. k : Transfer succeeded.
The procedures for [ RAW+JPEG transfer ] (p.394) and above steps 1 to
4 can also be performed while the camera is not connected to a
computer.