Canon EOS 5DS, Instruction Manual

Page: 302 / 534

302
You can change the settings of the ISO speed, sound-recording level,
etc. without making too much noise while shooting a movie.
When [
z
5: Silent Control ] is set to
[ Enable
h
], you can use the touch pad
<
h
> on the inner ring of the Quick
Control Dial.
You can just touch the top, bottom, left,
or right of <
h
> for silent operation.
During movie shooting, you can press
the <
Q
> button to display the Quick
Control screen and change the functions
below with <
h
>.
*1: With Auto ISO set.
*2: With [
Sound recording: Manual ] set.
3
Silent Control
N
Settable Functions
Shooting Mode
d
/
F s f a
Shutter speed - k - k
Aperture - - k k
Exposure compensation k k k k *
1
ISO speed - - - k
Recording level*
2
k k k k
If [
z
5: Silent Control ] is set to [ Enable
h
], you cannot change Quick
Control settings with the <
5
> Quick Control dial during movie shooting.
Even if you change the aperture silently with <
h
>, the movie will still
record the lens aperture-driving sound.
If there is water or dirt on the <
h
>, the touch operation may not work. In
such a case, use a clean cloth to clean the <
h
>. If it still does not work,
wait a while and try again.
Before shooting a movie, you can use <
h
> with the [ Rec. level ] setting to
adjust the sound-recording level.