Canon EOS 5DS Instruction Manual Download Page 269

Page: 269 / 534

269

Using AF to Focus (AF Method)

The camera detects and focuses on human faces. If a face moves, the
AF point <

> also moves to track the face.

Display the Live View image.

Press the <

> button.

The Live View image will appear on
the LCD monitor.

Select an AF point.

When a face is detected, the <

frame will appear over the face to be
focused on.

If multiple faces are detected, <

will be displayed. Use <

> to move

the <

> frame over the face you

want to focus on.

If no faces are detected, the camera
will switch to FlexiZone - Single
(p.271).

Focus on the subject.

Press the shutter button halfway to
focus.

When focus is achieved, the AF point
will turn green and the beeper will
sound.

If focus is not achieved, the AF point
will turn orange.

Take the picture.

Check the focus and exposure, then
press the shutter button completely to
take the picture (p.256).

(face)+Tracking:

Summary of Contents for EOS 5DS























































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands

Canon EOS 5DS, Instruction Manual

Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands