Canon EOS 5DS, Instruction Manual

Page: 231 / 534

231
P
Multiple Exposures
N
You can select a
1
image recorded on the card as the first single
exposure. The image data of the selected
1
image will remain intact.
You can only select
1
images. You cannot select
41
/
61
or
JPEG images.
1
Select [Select image for multi. expo.].
X The images on the card will be
displayed.
2
Select an image.
Turn the <
5
> dial to select the
image to be used as the first single
exposure, then press <
0
>.
Select [ OK ].
X
The file number of the selected image
will be displayed at the bottom of the
screen.
3
Take the picture.
When you select the first image, the
number of remaining exposures as set
with [
No. of exposures ] will decrease
by 1. For example, if [ No. of
exposures ] is 3, you can shoot two
exposures.
Merging Multiple Exposures with an Image Recorded on the Card
The following cannot be selected as the first single exposure: Images
shot with [
z
3: Highlight tone priority ] set to [ Enable ], images whose
[
z
4: Crop/aspect ratio ] is set to any setting other than [ Full-frame ]
(p.154), and images having cropping information (p.411).
[ Disable ] will be applied for [
z
1: Lens aberration correction ] and
[
z
2: Auto Lighting Optimizer ] regardless of the settings of the
1
image selected as the first single exposure.
The ISO speed, Picture Style, high ISO speed noise reduction, and color space,
etc. set for the first
1
image will also be applied for the subsequent images.
If [
z
3: Picture Style ] is Auto for the RAW image selected as the first
1
image, Standard will be applied for shooting.
You cannot select an image taken with another camera.