manualshive.com logo in svg

Canon EOS 5D Mark III, Instruction Manual, Page: 68 / 404

Share
Download
Canon EOS 5D Mark III Instruction Manual Download Page 68

A

 Full Auto Techniques (Scene Intelligent Auto)

68

You can shoot while viewing the image on the LCD monitor. This is 
called “Live View shooting”. For details, see page 197.

1

Set the Live View shooting/Movie 
shooting switch to <

A

>.

2

Display the Live View image on 
the LCD monitor.

 

Press the <

0

> button.

X

The Live View image will appear on 
the LCD monitor.

3

Focus the subject.

 

Aim the center AF point < > on the 
subject.

 

Press the shutter button halfway to 
focus.

X

When focus is achieved, the AF point 
will turn green and the beeper will 
sound.

4

Take the picture.

 

Press the shutter button completely.

X

The picture will be taken and the 
captured image is displayed on the 
LCD monitor.

X

After the image review ends, the 
camera will return to Live View 
shooting automatically.

 

Press the <

0

> button to end the 

Live View shooting.

A

 Live View Shooting

COP

Y

Summary of Contents for EOS 5D Mark III





















































































































































































































































































































































































































Reviews:

No comments