Canon EOS 5D Mark III Page 199 Instruction Manual Download

Page: 199 / 404

199

Shooting with the LCD Monitor

Set [

4: Live View shoot.

] to [

Enable

In the <

> mode, it is displayed under

[

Battery Life with Live View Shooting

[Approx. number of shots]

The figures above are based on a fully-charged Battery Pack LP-E6 and CIPA
(Camera & Imaging Products Association) testing standards.

With a fully-charged Battery Pack LP-E6, continuous Live View shooting is
possible for approx. 1 hr. 30 min. at 23°C / 73°F.

Enabling Live View Shooting

Temperature

At 23°C / 73°F

At 0°C / 32°F

Possible shots

200

180

During Live View shooting, do not point the lens toward the sun. The
sun’s heat can damage the camera’s internal components.

Cautions for using Live View shooting are on pages 215-216.

You can also focus by pressing the <

> button.

When flash is used, there will be two shutter sounds, but only one shot
will be taken.

If the camera is not operated for a prolonged period, the power will turn
off automatically as set with [

2: Auto power off

] (p.55). If [

2: Auto

power off

] is set to [

Disable

], Live View shooting will end automatically

after 30 min. (camera power remains on).

With the stereo AV cable (provided) or HDMI cable (sold separately), you
can display the Live View image on a TV (p.268, 271).

COP

Summary of Contents for EOS 5D Mark III





















































































































































































































































































































































































































Search results

Summary of Contents for EOS 5D Mark III

Reviews:

Related manuals for EOS 5D Mark III

Brands by name

Popular brands

Canon EOS 5D Mark III, Instruction Manual

Search results

Summary of Contents for EOS 5D Mark III

Reviews:

Related manuals for EOS 5D Mark III

Brands by name

Popular brands