manualshive.com logo in svg

Canon EOS 5D Mark III, Instruction Manual, Page: 148 / 404

Share
Download
Canon EOS 5D Mark III Instruction Manual Download Page 148

148

3

 Lens Peripheral Illumination / Chromatic Aberration Correction

1

Select the setting.

 

Check that [

Correction data 

available

] is displayed for the 

attached lens.

 

Turn the <

5

> dial to select 

[

Chromatic aberration

], then press 

<

0

>.

 

Select [

Enable

], then press <

0

>.

 

If [

Correction data not available

] is 

displayed, see “About the Lens 
Correction Data” on the next page.

2

Take the picture.

 

The image will be recorded with the 
chromatic aberration corrected.

Chromatic Aberration Correction

If you play back a 

1

 image shot with the chromatic aberration corrected, 

the image will be displayed on the camera without  the chromatic aberration 
correction applied. Check the chromatic aberration correction with Digital 
Photo Professional (provided software, p.394).

COP

Y

Summary of Contents for EOS 5D Mark III





















































































































































































































































































































































































































Reviews:

No comments