manualshive.com logo in svg

Canon EOS 5D Marc 3, Instruction Manual, Page: 75 / 408

Share
Download
Canon EOS 5D Marc 3 Instruction Manual Download Page 75

75

Although this is the same as single-point AF, the 
selected AF point <

O

> covers a smaller area to 

focus. Effective for pinpoint focusing of 
overlapping subjects such as an animal in a cage.
Since Spot AF covers a very small area, focusing 
may be difficult during hand-held shooting or for a 
moving subject.

Select one AF point <

S

> to be used for focusing.

The manually-selected AF point <

S

> and adjacent AF points <

w

> 

(above, below, on the left and on the right) are used to focus. Effective 
when it is difficult to track a moving subject with just one AF point.
With AI Servo AF, the manually-selected AF point <

S

> must focus-

track the subject first. However, it is easier to focus the target subject 
than with Zone AF.
With One-Shot AF, when focus is achieved with an expanded AF point, 
the expanded AF point <

S

> will also be displayed along with the 

manually-selected AF point <

S

>.

AF Area Selection Modes

N

Single-point Spot AF (Manual selection)

Single-point AF (Manual selection)

AF point expansion (Manual selection  )

H111_EN.book  Page 75  Tuesday, March 5, 2013  2:18 PM

Summary of Contents for EOS 5D Marc 3

























































































































































































































































































































































































































Reviews:

No comments