manualshive.com logo in svg

Canon EOS 5D Marc 3, Instruction Manual, Page: 388 / 408

Share
Download
Canon EOS 5D Marc 3 Instruction Manual Download Page 388

388

Use of genuine Canon accessories is recommended

This product is designed to achieve excellent performance when used with 
genuine Canon accessories. Canon shall not be liable for any damage to this 
product and/or accidents such as fire, etc., caused by the malfunction of non-
genuine Canon accessories (e.g., a leakage and/or explosion of a battery 
pack). Please note that this warranty does not apply to repairs arising out of the 
malfunction of non-genuine Canon accessories, although you may request 
such repairs on a chargeable basis.

Battery Pack LP-E6 is dedicated to Canon products only. Using it with an 
incompatible battery charger or product may result in malfunction or 
accidents for which Canon cannot be held liable.

H111_EN.book  Page 388  Tuesday, March 5, 2013  2:18 PM

Summary of Contents for EOS 5D Marc 3

























































































































































































































































































































































































































Reviews:

No comments