Canon EOS 5D Marc 3, Instruction Manual, Page: 307 / 408

307
w Printing
5
Set the date and file number
imprinting.
Set if necessary.
Select <
I
>, then press <
0
>.
Set as desired, then press <
0
>.
6
Set the number of copies.
Set if necessary.
Select <
R
>, then press < 0 >.
Set the number of copies, then press
<
0 >.
7
Start printing.
Select [ Print ], then press <
0
>.
With Easy printing, you can print another image using the same settings.
Just select the image and press the <
m > button. With Easy printing,
the number of copies will always be 1. (You cannot set the number of
copies.) Also, any trimming (p.309) will not be applied.
The [ Default ] setting for printing effects and other options are the printer’s
own default settings as set by the printer’s manufacturer. Refer to the
printer’s instruction manual to find out what the [
Default ] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [
Print ].
If image tilt correction (p.309) is applied, it may take longer to print the
image.
To stop the printing, press <
0
> while [ Stop ] is displayed, then select
[ OK ].
If you execute [ 5 4: Clear all camera settings ] (p.56), all the settings
will revert to their defaults.
H111_EN.book Page 307 Tuesday, March 5, 2013 2:18 PM