manualshive.com logo in svg

Canon EOS 5D Marc 3, Instruction Manual, Page: 239 / 408

Share
Download
Canon EOS 5D Marc 3 Instruction Manual Download Page 239

239

The time code is a time reference 
recorded automatically to synchronize 
the video and audio during movie 
shooting. It is recorded at all times in the 
following units: hours, minutes, seconds, 
and frames. It is mainly used during 
movie editing.
Set the time code with [

z

5: Time 

code

]. In the <

A

> mode, this function 

is displayed in [

z

3

].

[

Rec run

] : The time code counts up only while you are shooting a 

movie. The time code will be continuous across 
sequential movie files.

[

Free run

] : The time code counts up whether you are shooting or not.

You can set the time code’s start time.
[

Manual input setting

]: You can freely set the hour, minute, second, 

and frames.

[

Reset

]

: The time set with [

Manual input setting

] and 

[

Set to camera time

] is reset to 00:00:00:00.

[

Set to camera time

] : Sets hours, minutes, and seconds to match 

the camera’s internal clock. “Frames” will be 
set to 00.

3

 Setting the Time Code

Count Up

Start Time Setting

If [

Free run

] is set and you change the time, zone, or daylight saving time 

(p.36), the time code will be affected.

H111_EN.book  Page 239  Tuesday, March 5, 2013  2:18 PM

Summary of Contents for EOS 5D Marc 3

























































































































































































































































































































































































































Reviews:

No comments