Canon EOS 5D Marc 3 Page 223 Instruction Manual Download

Page: 223 / 408

223

Shooting Movies

ISO speed in the

mode

In the

mode, the ISO speed will be set automatically within ISO

100 - 12800.

ISO speed in the

, and

modes

The ISO speed will be set automatically within ISO 100 - 12800.

Under [

2: ISO speed settings

] (p.128), if you set the [

ISO speed

range

]’s [

Maximum

] setting to [

25600/H

] in the

, or

mode,

the automatic ISO range will be expanded to H (equivalent to ISO
25600). Be aware that when you set [

Maximum

] to [

25600

], the

maximum ISO speed will not be expanded and remains ISO 12800.

If [

3: Highlight tone priority

] is set to [

Enable

] (p.148), the ISO

speed will be ISO 200 - 12800.

Under [

2: ISO speed settings

], [

Auto ISO range

] and [

Min.

shutter spd.

] cannot be set (p.129, 130) for movie shooting. Also,

[

ISO speed range

] cannot be set in the

mode.

If [

Minimum

] is set to [

L(50)

] and [

Maximum

] to [

H1(51200)

] or

[

H2(102400)

] in [

ISO speed range

], and you switch from still photo shooting

to movie shooting, the minimum setting for automatic ISO range will be ISO
100 and the maximum will be H (ISO 25600, except in

and

shooting

modes). The ISO speed cannot be expanded to ISO 50 or ISO 51200/
102400.

H111_EN.book Page 223 Tuesday, March 5, 2013 2:18 PM

Summary of Contents for EOS 5D Marc 3

























































































































































































































































































































































































































Search results

Summary of Contents for EOS 5D Marc 3

Reviews:

Related manuals for EOS 5D Marc 3

Brands by name

Popular brands

Canon EOS 5D Marc 3, Instruction Manual

Search results

Summary of Contents for EOS 5D Marc 3

Reviews:

Related manuals for EOS 5D Marc 3

Brands by name

Popular brands