Canon EOS 5D Marc 3 Page 200 Instruction Manual Download

Page: 200 / 408

200

Set the Live View shooting/Movie
shooting switch to <

Display the Live View image.

Press the <

> button.

The Live View image will appear on
the LCD monitor.

The Live View image will closely reflect the
brightness level of the actual image you capture.

Focus the subject.

When you press the shutter button
halfway, the camera will focus with
the current AF mode (p.209).

Take the picture.

Press the shutter button completely.

The picture will be taken and the captured
image is displayed on the LCD monitor.

After the image review ends, the camera will
return to Live View shooting automatically.

Press the <

> button to end the

Live View shooting.

Shooting with the LCD Monitor

The image’s field of view is approx. 100% (when the image-recording
quality is set to JPEG

The metering mode will be fixed to evaluative metering for Live View shooting.

In the <

> shooting modes, you can check the depth of

field by pressing the depth-of-field preview button.

During continuous shooting, the exposure set for the first shot will also
be applied to subsequent shots.

You can also use a remote controller (sold separately, p.188) for Live View shooting.

H111_EN.book Page 200 Tuesday, March 5, 2013 2:18 PM

Summary of Contents for EOS 5D Marc 3

























































































































































































































































































































































































































Search results

Summary of Contents for EOS 5D Marc 3

Reviews:

Related manuals for EOS 5D Marc 3

Brands by name

Popular brands

Canon EOS 5D Marc 3, Instruction Manual

Search results

Summary of Contents for EOS 5D Marc 3

Reviews:

Related manuals for EOS 5D Marc 3

Brands by name

Popular brands