Canon EOS 4000D Instruction Manual Download Page 158

Page: 158 / 322

158

Connecting the camera to a TV set is recommended to play back the
movies shot (p.224).

Set the Mode Dial to <



The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Focus on the subject.



Before shooting a movie, focus with
AF or manual focus (p.146-154).



When you press the shutter button
halfway, the camera will focus with
the current AF method.

Shoot the movie.



Press the <

> button to start

shooting a movie. To stop movie
shooting, press the <

> button

again.



While the movie is being shot, the [

]

mark will be displayed on the upper
right of the screen.



Sound will be recorded by the built-in
microphone.

Shooting Movies

Autoexposure Shooting

Recording movie

Built-in microphone

Check the recorded sound on a TV set or computer. The camera is not
equipped with a speaker.

Summary of Contents for EOS 4000D



































































































































































































































































































































Search results

Summary of Contents for EOS 4000D

Reviews:

Related manuals for EOS 4000D

Brands by name

Popular brands

Canon EOS 4000D, Instruction Manual

Search results

Summary of Contents for EOS 4000D

Reviews:

Related manuals for EOS 4000D

Brands by name

Popular brands