Canon EOS 4000D Instruction Manual Download Page 153

Page: 153 / 322

153

Using AF to Focus (AF Method)

Focus on the subject.



Aim the AF point over the subject and
press the shutter button halfway.



The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed. (No picture is
taken.)



When focus is achieved, the AF point
that achieved focus will turn green
and the Live View image will
reappear.



If focus is not achieved, the AF point
will turn orange and blink.

Take the picture.



Check the focus and exposure, then
press the shutter button completely to
take the picture (p.138).

You cannot take a picture during autofocusing. Take the picture while the
Live View image is displayed.

Summary of Contents for EOS 4000D



































































































































































































































































































































Search results

Summary of Contents for EOS 4000D

Reviews:

Related manuals for EOS 4000D

Brands by name

Popular brands

Canon EOS 4000D, Instruction Manual

Search results

Summary of Contents for EOS 4000D

Reviews:

Related manuals for EOS 4000D

Brands by name

Popular brands