manualshive.com logo in svg

Canon EOS 250D, Advanced User'S Manual, Page: 82 / 495

Share
Download
Canon EOS 250D Advanced User'S Manual Download Page 82

82

Shooting Landscapes

Use the <

3

> (Landscape) mode for wide scenery or to have everything in 

focus from near to far. For vivid blues and greens, and very sharp and crisp 

images.

 Shooting Tips

 

z

With a zoom lens, use the wide-angle end.

When using a zoom lens, set the lens to the wide-angle end to make 

the objects near and far in focus. It also adds breadth to landscapes.

 

z

Shooting night scenes.

The <

3

> mode is also good for night scenes because it disables 

the built-in flash. When shooting night scenes, use a tripod to prevent 

camera shake.

 

z

The built-in flash will not fire even in backlit or low-light conditions.

Summary of Contents for EOS 250D
















































































































































































































































































































































































































































































































Reviews:

No comments