Canon EOS 250D Page 169 Advanced User'S Manual Download

Page: 169 / 495

169

Using the Built-in Flash

In indoor, low light, or backlit conditions in daylight, just raise the built-

in flash and press the shutter button to easily take beautiful pictures.

In the <

> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set

automatically to prevent camera shake.

Raise the flash with your fingers.

In Creative Zone modes, shooting with

flash is possible whenever the flash is

raised.

While the flash is recharging, “

buSy

” is

displayed in the viewfinder, and

[BUSY]

is displayed on the LCD monitor.

Press the shutter button halfway.

In the bottom left of the viewfinder,

check that the <

> icon is displayed.

Take the picture.

When focus is achieved and you press

the shutter button completely, the flash

will fire at all times.

Before raising the flash, remove any accessories attached to the hot shoe.

Summary of Contents for EOS 250D
















































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands

Canon EOS 250D, Advanced User'S Manual

Search results

Summary of Contents for EOS 250D

Reviews:

Related manuals for EOS 250D

Brands by name

Popular brands