Canon EOS 2000D, Instruction Manual

Page: 95 / 144

95
Connecting via WPS (PBC Mode)
6
Connect to the access point.

Press the access point’s WPS button.
For details about where the button is
located and how long to press it, refer
to the access point’s instruction
manual.

Select [ OK ] and press <
0
> to
establish a connection with the
access point.
 When a connection with the access
point is established, the next screen
is displayed.
7
Select [Auto setting].

Select [ Auto setting ] and press
<
0
>.

Select [ OK ] and press <
0
> to
display an image on the card.
 The camera’s <
k
> lamp will light up
in green.

If [ Auto setting ] results in an error or
if you want to specify the settings
manually, see page 136.
8
Select the image(s) to send.

Select and send image(s). For
information on how to send images,
see page 104.
The settings for connecting to a Web service are now complete.
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.