Canon EOS 2000D, Instruction Manual

Page: 96 / 144

96
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.

Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.

It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].

Under the [
5
3 ] tab, set [ Wi-Fi/NFC ]
to [ Enable ], then select [ Wi-Fi
function ] (p.17).

If a screen for setting a nickname (for
identification) appears, register a
nickname (p.14).
2
Select [
m
].

Select [
m
] (Upload to Web service)
and press <
0
>.
3
Select a Web service.

Select a Web service to connect to,
then press <
0
>.

The contents and ordering of the list
of items displayed will vary depending
on settings (p.91).

The Web service to connect to can be
changed when reconnecting (p.108).
 The camera’s <
k
> lamp will blink.

Depending on the selected Web
service, the [
Send to ] screen is
displayed. Select a destination
(p.103).
Connecting via WPS (PIN Mode)