Canon EOS 2000D, Instruction Manual

Page: 54 / 144

54
The camera can reconnect to a camera for which connection settings
have been registered.
1
Select [Wi-Fi function].

Under the [
5
3 ] tab, set [ Wi-Fi/NFC ]
to [ Enable ], then select [ Wi-Fi
function ].
2
Select [
z
].

Select [
z
] (Transfer images
between cameras) and press <
0
>.
3
Select [Connect].

When settings for multiple connection
destinations are registered, select
[
Choose set. ], select the connection
destination, then connect to the
destination.

Select [ Connect ] and press <
0
>.

On the confirmation dialog, select
[
OK ].

Perform the reconnection procedure
on the target camera as well.
 The images on the card are displayed
and the images to send can be
selected.

By default, settings are named after
the nickname of the target camera.
Reconnecting
If Wi-Fi settings are cleared (p.115) or the connection setting is deleted
(p.114) on the target camera, reconnection will no longer be possible. Select
[
Review/change settings ] and change the settings (p.112).