Canon EOS-1D C Instruction Manual Download

Page: 234 / 420

234

Shooting Movies

While shooting a movie, you can also
take a still photo by pressing the shutter
button completely.

Taking still photos during movie shooting

If you take a still photo during movie shooting, the movie will record
a still moment lasting approx. 1 sec.

The captured still photo will be recorded to the card, and the movie
shooting will resume automatically when the Live View image is
displayed.

The movie and still photo will be recorded as separate files on the
card.

If [

Record func.

] (p.118) is set to [

Standard

] or [

Auto switch card

the movies and still photos will be recorded to the same card. If
[

Rec. separately

] or [

Rec. to multiple

] is set, the movies will be

recorded to the card set for [

Playback

]. The still photos will be

recorded at the image-recording quality set for the respective card.

Functions particular to still photo shooting are shown below. Other
functions will be the same as for movie shooting.

* If highlight tone priority is set, the ISO speed range will start from ISO 200.

Shooting Still Photos

Function

Settings

Image-Recording
Quality

As set with [

2: Img type/size

] and [

2: JPEG quality

ISO Speed*

• <

BULB

>: ISO 100 - 25600

• <

>: See “ISO speed during manual-exposure shooting”

on page 230.

Exposure Setting

• <

BULB

>: Automatically set shutter speed and aperture.

• <

> : Manually set shutter speed and automatically set

aperture.

• <

>: Manually set aperture and automatically set

shutter speed.

• <

> : Manually set shutter speed and aperture.

COP

Summary of Contents for EOS-1D C





































































































































































































































































































































































































































Search results

Summary of Contents for EOS-1D C

Reviews:

Related manuals for EOS-1D C

Brands by name

Popular brands

Canon EOS-1D C, Instruction Manual

Search results

Summary of Contents for EOS-1D C

Reviews:

Related manuals for EOS-1D C

Brands by name

Popular brands