Canon EOS 1300D Page 54 Instruction Manual Download

Page: 54 / 326

The LCD monitor can display the shooting settings screen, menu
screen, captured images, etc.



When you turn on the power, the
shooting settings will be displayed.



When you press the shutter button
halfway, the display will turn off.
And when you let go of the shutter
button, the display will turn on.



You can also turn off the display by
pressing the <

> button.

Press

the button again to turn on the
display.

Switching the LCD Monitor Display

Shooting Function Settings



Appears when you press the
<

> button. Press the

button again to return to the
shooting settings screen.



Appears when you press the
<

> button. Press the button

again to return to the shooting
settings screen.

Menu Functions

Captured Image



You can set [

2: LCD off/on btn

] so that the shooting settings display

does not keep turning off and on (p.197).



Even when the menu screen or captured image is displayed, pressing
the shutter button will enable you to shoot immediately.

Summary of Contents for EOS 1300D







































































































































































































































































































































Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands

Canon EOS 1300D, Instruction Manual

Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands