Canon EOS 1300D Page 270 Instruction Manual Download

Page: 270 / 326

270

You can power the camera with a household power outlet by using the
DC Coupler DR-E10 and Compact Power Adapter CA-PS700 (both
sold separately).

Connect the DC coupler.



Connect the DC cord’s plug to the DC
coupler.

Insert the DC coupler.



Open the cover and insert the DC
coupler until it locks in place.

Push in the DC cord.



Open the DC cord hole cover and
install the cord as shown in the
illustration.



Close the cover.

Connect the power cord.



Connect the power cord as shown in
the illustration.



After using the camera, unplug the
power plug from the power outlet.

Using a Household Power Outlet

Do not connect or disconnect the power cord when the camera’s power
switch is set to <

AC Adapter Kit ACK-E10 can also be used.

Summary of Contents for EOS 1300D







































































































































































































































































































































Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands

Canon EOS 1300D, Instruction Manual

Search results

Summary of Contents for EOS 1300D

Reviews:

Related manuals for EOS 1300D

Brands by name

Popular brands